B1404 Code: Meaning, Symptoms, Causes & Fix

B1404

Overview

Code B1404 indicates a fault in Driver Power Window Down Circuit Open, typically within body electronics and comfort modules.

Symptoms

  • related warning lamp illuminated
  • battery draw complaints
  • feature inoperative intermittently

Common causes

  • Broken terminal inside harness affecting driver power window down circuit open
  • Open circuit in wiring
  • Connector pin damage/corrosion or harness stress near related components

How to diagnose B1404

  1. Confirm B1404 and capture freeze-frame data with a professional scan tool.
  2. Inspect wiring, connectors, and grounds related to driver power window down circuit open for obvious defects.
  3. Use a continuity test from module pin to component to identify opens/high resistance.
  4. Check for related DTCs to identify the root-cause chain before replacing parts.
  5. After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code B1404

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with B1404?

Most vehicles can be driven short-term with B1404, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

  1. Repair obvious wiring/connector faults first to prevent repeat parts replacement.
  2. Address the root fault mode (open) in the driver power window down circuit open circuit/system.
  3. Apply the required relearn/adaptation procedure if specified by service information.
  4. Road-test and verify B1404 remains cleared under the conditions that originally set the code.

Fix options

  • Restore continuity and verify pin tension.
  • Clear corrosion and protect terminals.
  • Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$160-$850

Common mistakes when diagnosing B1404

  • Replacing parts without verifying voltage, ground, and signal integrity first.
  • Ignoring related stored/pending codes that indicate upstream faults.
  • Skipping post-repair verification drive cycle and readiness checks.

B1404 in common vehicles

B1404 appears across makes such as Mazda, Subaru, Lexus, Jeep. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes B1404?

B1404 is commonly set by open faults affecting driver power window down circuit open.

How much does it cost to fix B1404?

For B1404, repair costs are typically $160-$850 depending on exact root cause, labor rates, and part quality.

Can I clear B1404 without repair?

You can clear B1404 temporarily, but the code usually returns until the underlying fault is corrected.

Helpful tools