B1564 Code: Meaning, Symptoms, Causes & Fix

Overview

B1564 is triggered when monitoring logic identifies an issue with Door Ajar Circuit Open affecting body electronics and comfort modules.

Symptoms

related warning lamp illuminated
battery draw complaints
feature inoperative intermittently

Common causes

Open circuit in wiring affecting door ajar circuit open
Disconnected or loose connector
Connector pin damage/corrosion or harness stress near related components

How to diagnose B1564

Confirm B1564 and capture freeze-frame data with a professional scan tool.
Inspect wiring, connectors, and grounds related to door ajar circuit open for obvious defects.
Use a continuity test from module pin to component to identify opens/high resistance.
Check for related DTCs to identify the root-cause chain before replacing parts.
After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code B1564

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with B1564?

Most vehicles can be driven short-term with B1564, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

Repair obvious wiring/connector faults first to prevent repeat parts replacement.
Address the root fault mode (open) in the door ajar circuit open circuit/system.
Apply the required relearn/adaptation procedure if specified by service information.
Road-test and verify B1564 remains cleared under the conditions that originally set the code.

Fix options

Clear corrosion and protect terminals.
Repair open circuit and secure connector lock.
Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$160-$850

Common mistakes when diagnosing B1564

Replacing parts without verifying voltage, ground, and signal integrity first.
Ignoring related stored/pending codes that indicate upstream faults.
Skipping post-repair verification drive cycle and readiness checks.

B1564 in common vehicles

B1564 appears across makes such as Mazda, Subaru, Lexus, Jeep. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes B1564?

B1564 is commonly set by open faults affecting door ajar circuit open.

How much does it cost to fix B1564?

For B1564, repair costs are typically $160-$850 depending on exact root cause, labor rates, and part quality.

Can I clear B1564 without repair?

You can clear B1564 temporarily, but the code usually returns until the underlying fault is corrected.