B1658 Code: Meaning, Symptoms, Causes & Fix

B1658

Overview

When B1658 appears, the control module has detected abnormal behavior related to Seat Driver Rear Up Circuit Short To Ground in body electronics and comfort modules.

Symptoms

  • feature inoperative intermittently
  • module resets or glitches
  • related warning lamp illuminated

Common causes

  • Open circuit in wiring affecting seat driver rear up circuit short to ground
  • Broken terminal inside harness
  • Connector pin damage/corrosion or harness stress near related components

How to diagnose B1658

  1. Confirm B1658 and capture freeze-frame data with a professional scan tool.
  2. Inspect wiring, connectors, and grounds related to seat driver rear up circuit short to ground for obvious defects.
  3. Use a continuity test from module pin to component to identify opens/high resistance.
  4. Check for related DTCs to identify the root-cause chain before replacing parts.
  5. After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code B1658

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with B1658?

Most vehicles can be driven short-term with B1658, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

  1. Repair obvious wiring/connector faults first to prevent repeat parts replacement.
  2. Address the root fault mode (open) in the seat driver rear up circuit short to ground circuit/system.
  3. Apply the required relearn/adaptation procedure if specified by service information.
  4. Road-test and verify B1658 remains cleared under the conditions that originally set the code.

Fix options

  • Repair open circuit and secure connector lock.
  • Clear corrosion and protect terminals.
  • Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$160-$850

Common mistakes when diagnosing B1658

  • Replacing parts without verifying voltage, ground, and signal integrity first.
  • Ignoring related stored/pending codes that indicate upstream faults.
  • Skipping post-repair verification drive cycle and readiness checks.

B1658 in common vehicles

B1658 appears across makes such as Nissan, Hyundai, Kia, Volkswagen. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes B1658?

B1658 is commonly set by open faults affecting seat driver rear up circuit short to ground.

How much does it cost to fix B1658?

For B1658, repair costs are typically $160-$850 depending on exact root cause, labor rates, and part quality.

Can I clear B1658 without repair?

You can clear B1658 temporarily, but the code usually returns until the underlying fault is corrected.

Helpful tools