B1746 Code: Meaning, Symptoms, Causes & Fix

Overview

B1746 is triggered when monitoring logic identifies an issue with Mirror Passenger Horizontal Switch Circuit Open affecting body electronics and comfort modules.

Symptoms

module resets or glitches
feature inoperative intermittently
battery draw complaints

Common causes

Disconnected or loose connector affecting mirror passenger horizontal switch circuit open
Open circuit in wiring
Connector pin damage/corrosion or harness stress near related components

How to diagnose B1746

Confirm B1746 and capture freeze-frame data with a professional scan tool.
Inspect wiring, connectors, and grounds related to mirror passenger horizontal switch circuit open for obvious defects.
Use a continuity test from module pin to component to identify opens/high resistance.
Check for related DTCs to identify the root-cause chain before replacing parts.
After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code B1746

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with B1746?

Most vehicles can be driven short-term with B1746, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

Repair obvious wiring/connector faults first to prevent repeat parts replacement.
Address the root fault mode (open) in the mirror passenger horizontal switch circuit open circuit/system.
Apply the required relearn/adaptation procedure if specified by service information.
Road-test and verify B1746 remains cleared under the conditions that originally set the code.

Fix options

Repair open circuit and secure connector lock.
Restore continuity and verify pin tension.
Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$160-$850

Common mistakes when diagnosing B1746

Replacing parts without verifying voltage, ground, and signal integrity first.
Ignoring related stored/pending codes that indicate upstream faults.
Skipping post-repair verification drive cycle and readiness checks.

B1746 in common vehicles

B1746 appears across makes such as Nissan, Hyundai, Kia, Volkswagen. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes B1746?

B1746 is commonly set by open faults affecting mirror passenger horizontal switch circuit open.

How much does it cost to fix B1746?

For B1746, repair costs are typically $160-$850 depending on exact root cause, labor rates, and part quality.

Can I clear B1746 without repair?

You can clear B1746 temporarily, but the code usually returns until the underlying fault is corrected.