B1992 – Driver Side, Side mount Airbag Circuit Short to Vbatt: Symptoms, Causes, Diagnosis & Repair Cost (2026 Guide)

B1992

Last updated:

Overview

The control module stored B1992 because it detected a problem with: Driver Side, Side mount Airbag Circuit Short to Vbatt.

B1992 relates to Driver Side, Side mount Airbag Circuit Short to Vbatt. Use a quality scan tool, follow wiring diagrams for your vehicle, and confirm tests before replacing expensive parts.

What does the B1992 code mean?

When B1992 is set, the vehicle’s diagnostics detected an issue described as: Driver Side, Side mount Airbag Circuit Short to Vbatt. In practice, the ECM/PCM (and related modules) compare sensor inputs, commanded outputs, and self-tests for that subsystem. The exact repair depends on whether the fault is wiring-related, component-related, or a rationality/performance issue for this circuit or system.

Common symptoms of B1992

  • Seat belt warning issues
  • Scan tool shows restraint codes
  • SRS/airbag warning lamp
  • Safety system disabled message
  • Passenger sensor messages
  • Intermittent warning chime

Possible causes

  • Fault affecting Driver Side, Side mount Airbag Circuit Short to Vbatt (wiring, connector, or component)
  • Component failure in the described system
  • Control module strategy or calibration issue
  • Electrical fault in the monitored circuit
  • Control module or software calibration issue (less common—verify tests first)
  • Past repairs or aftermarket parts causing out-of-spec operation

How to diagnose B1992

  1. Scan for B1992 and review freeze frame / pending codes for related faults
  2. Inspect connectors and wiring related to: Driver Side, Side mount Airbag Circuit Short to Vbatt
  3. Compare live data and commanded vs actual values for the affected system (per service information)
  4. Perform circuit tests appropriate to the fault type (continuity, voltage, resistance) before replacing parts
  5. Confirm power and ground integrity at the relevant module or sensor
  6. After repair, clear DTCs and verify under the conditions that originally set B1992

Tip: Use a scan tool that shows live data and freeze frame for the conditions when the code set.

Severity of code B1992

High: This fault can impact safety-related systems or core drivability—prioritize professional diagnosis.

Can you drive with B1992?

Short trips may be okay if the vehicle feels normal, but have it diagnosed—especially if performance, safety warnings, or overheating are present.

Avoid heavy acceleration, towing, or long highway drives until the cause of B1992 is confirmed and repaired.

How to fix it (step-by-step)

  1. Start with visual inspection and connector cleaning/tightening where needed
  2. Confirm failure mode with testing—avoid swapping parts without evidence
  3. Repair wiring or replace the failed component per manufacturer procedure
  4. Clear faults, run relearns if required, and road test to confirm

Repair & fix options

  • Test component against service limits
  • Clear codes and verify with drive cycle
  • Inspect connectors and wiring first
  • Clear codes and verify repair with a drive cycle and readiness where applicable
  • Reinspect related monitors if the code returns after repair

Typical repair cost

$120 – $1,800+ for many common repairs

Estimated cost breakdown for B1992
Repair type Typical range
Diagnostic And Minor $120 – $600
Common Component Work $200 – $900
Major Subsystem Repair $400 – $1,800+
Severe Or Replacement Varies widely—see a qualified shop

How to help prevent B1992 in the future

  • Fix new codes early before secondary damage or catalyst stress
  • Keep connectors clean and secure; address rodent or water intrusion in harnesses
  • Use the correct fluids/parts for your vehicle and service intervals
  • Avoid ignoring pending codes after battery work or repairs

When to see a mechanic

Schedule diagnosis if the check engine light is on, drivability is worse, or you notice new noises, smells, or warning lamps. For safety-related (SRS/ABS) or overheating symptoms, prioritize a qualified shop immediately.

Common mistakes when diagnosing B1992

  • Replacing sensors/modules without verifying wiring and reference voltages
  • Ignoring related codes that identify the real root cause
  • Clearing codes without a verification drive cycle

Common vehicles & notes for B1992

  • Nissan / Hyundai models (common examples—verify for your vehicle)
  • Kia / Mazda applications vary by engine and model year
  • Many other makes—this is a standardized OBD-II definition: Driver Side, Side mount Airbag Circuit Short to Vbatt

B1992 is reported across many platforms including Nissan, Hyundai, Kia, Mazda. Always use VIN-specific service information for testing limits and calibration steps.

Frequently asked questions

What does B1992 mean?

B1992 indicates a fault involving Driver Side, Side mount Airbag Circuit Short to Vbatt, based on what the control module detected during self-tests or live monitoring.

Is it safe to drive with B1992?

If the vehicle runs normally and no warning lights are flashing, short trips may be reasonable—but avoid ignoring symptoms like misfire, overheating, ABS/SRS warnings, or major loss of power.

How much does it cost to fix B1992?

Typical repairs often fall in the ranges shown on this page, but final cost depends on labor rate, parts quality, and whether the issue is wiring vs. a major component.

What is the most common cause of B1992?

Most shops start with wiring/connectors and the directly monitored component for “Driver Side, Side mount Airbag Circuit Short to Vbatt,” then expand testing if the fault returns.

Will B1992 clear itself?

It may become intermittent, but if the underlying fault remains, the code will usually return—especially after a drive cycle.

Can a weak battery cause B1992?

Low system voltage can cause odd sensor/module behavior, but you should still validate the actual DTC and perform normal circuit/component tests.

Related tools

This information is for educational purposes only and is not a substitute for hands-on diagnosis. Always follow manufacturer service information and consult a qualified automotive technician for repairs.