C1106 Code: Meaning, Symptoms, Causes & Fix

Overview

Symptoms

• ABS/traction light on
• longer braking intervention
• reduced stability control performance

Common causes

• Disconnected or loose connector affecting traction control disable switch circuit short to battery
• Open circuit in wiring
• Connector pin damage/corrosion or harness stress near related components

How to diagnose C1106

1. Confirm C1106 and capture freeze-frame data with a professional scan tool.
2. Inspect wiring, connectors, and grounds related to traction control disable switch circuit short to battery for obvious defects.
3. Use a continuity test from module pin to component to identify opens/high resistance.
4. Check for related DTCs to identify the root-cause chain before replacing parts.
5. After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code C1106

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with C1106?

Most vehicles can be driven short-term with C1106, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

1. Repair obvious wiring/connector faults first to prevent repeat parts replacement.
2. Address the root fault mode (open) in the traction control disable switch circuit short to battery circuit/system.
3. Apply the required relearn/adaptation procedure if specified by service information.
4. Road-test and verify C1106 remains cleared under the conditions that originally set the code.

Fix options

• Repair open circuit and secure connector lock.
• Clear corrosion and protect terminals.
• Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$240-$1200

Common mistakes when diagnosing C1106

• Replacing parts without verifying voltage, ground, and signal integrity first.
• Ignoring related stored/pending codes that indicate upstream faults.
• Skipping post-repair verification drive cycle and readiness checks.

C1106 in common vehicles

C1106 appears across makes such as Nissan, Hyundai, Kia, Volkswagen. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes C1106?

C1106 is commonly set by open faults affecting traction control disable switch circuit short to battery.

How much does it cost to fix C1106?

For C1106, repair costs are typically $240-$1200 depending on exact root cause, labor rates, and part quality.

Can I clear C1106 without repair?

You can clear C1106 temporarily, but the code usually returns until the underlying fault is corrected.

Helpful tools

• Estimate repair cost
• Decode your VIN
• Calculate fuel cost