C1402 Code: Meaning, Symptoms, Causes & Fix

Overview

Code C1402 indicates a fault in Traction Control Valve RF Circuit Short To Ground, typically within ABS/chassis dynamics and brake control.

Symptoms

longer braking intervention
ABS/traction light on
chassis warning indicator

Common causes

Broken terminal inside harness affecting traction control valve rf circuit short to ground
Open circuit in wiring
Connector pin damage/corrosion or harness stress near related components

How to diagnose C1402

Confirm C1402 and capture freeze-frame data with a professional scan tool.
Inspect wiring, connectors, and grounds related to traction control valve rf circuit short to ground for obvious defects.
Use a continuity test from module pin to component to identify opens/high resistance.
Check for related DTCs to identify the root-cause chain before replacing parts.
After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code C1402

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with C1402?

Most vehicles can be driven short-term with C1402, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

Repair obvious wiring/connector faults first to prevent repeat parts replacement.
Address the root fault mode (open) in the traction control valve rf circuit short to ground circuit/system.
Apply the required relearn/adaptation procedure if specified by service information.
Road-test and verify C1402 remains cleared under the conditions that originally set the code.

Fix options

Clear corrosion and protect terminals.
Repair open circuit and secure connector lock.
Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$240-$1200

Common mistakes when diagnosing C1402

Replacing parts without verifying voltage, ground, and signal integrity first.
Ignoring related stored/pending codes that indicate upstream faults.
Skipping post-repair verification drive cycle and readiness checks.

C1402 in common vehicles

C1402 appears across makes such as Nissan, Hyundai, Kia, Volkswagen. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes C1402?

C1402 is commonly set by open faults affecting traction control valve rf circuit short to ground.

How much does it cost to fix C1402?

For C1402, repair costs are typically $240-$1200 depending on exact root cause, labor rates, and part quality.

Can I clear C1402 without repair?

You can clear C1402 temporarily, but the code usually returns until the underlying fault is corrected.