C1460 Code: Meaning, Symptoms, Causes & Fix

Overview

Symptoms

• chassis warning indicator
• reduced stability control performance
• longer braking intervention

Common causes

• Open circuit in wiring affecting vehicle accelerometer power circuit failure
• Disconnected or loose connector
• Connector pin damage/corrosion or harness stress near related components

How to diagnose C1460

1. Confirm C1460 and capture freeze-frame data with a professional scan tool.
2. Inspect wiring, connectors, and grounds related to vehicle accelerometer power circuit failure for obvious defects.
3. Use a continuity test from module pin to component to identify opens/high resistance.
4. Check for related DTCs to identify the root-cause chain before replacing parts.
5. After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code C1460

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with C1460?

Most vehicles can be driven short-term with C1460, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

1. Repair obvious wiring/connector faults first to prevent repeat parts replacement.
2. Address the root fault mode (open) in the vehicle accelerometer power circuit failure circuit/system.
3. Apply the required relearn/adaptation procedure if specified by service information.
4. Road-test and verify C1460 remains cleared under the conditions that originally set the code.

Fix options

• Clear corrosion and protect terminals.
• Repair open circuit and secure connector lock.
• Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$240-$1200

Common mistakes when diagnosing C1460

• Replacing parts without verifying voltage, ground, and signal integrity first.
• Ignoring related stored/pending codes that indicate upstream faults.
• Skipping post-repair verification drive cycle and readiness checks.

C1460 in common vehicles

C1460 appears across makes such as Mazda, Subaru, Lexus, Jeep. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes C1460?

C1460 is commonly set by open faults affecting vehicle accelerometer power circuit failure.

How much does it cost to fix C1460?

For C1460, repair costs are typically $240-$1200 depending on exact root cause, labor rates, and part quality.

Can I clear C1460 without repair?

You can clear C1460 temporarily, but the code usually returns until the underlying fault is corrected.

Helpful tools

• Estimate repair cost
• Decode your VIN
• Calculate fuel cost