P0259 is triggered when monitoring logic identifies an issue with Injection lump Fuel Metering Control B High (Cam/Rotor/Injector) affecting fuel delivery and pressure control.
P0259 Code: Meaning, Symptoms, Causes & Fix
Overview
Symptoms
- hesitation under acceleration
- reduced fuel economy
- hard starting
Common causes
- Reference/ground fault affecting injection lump fuel metering control b high (cam/rotor/injector)
- Signal biased high from short-to-voltage
- Connector pin damage/corrosion or harness stress near related components
How to diagnose P0259
- Confirm P0259 and capture freeze-frame data with a professional scan tool.
- Inspect wiring, connectors, and grounds related to injection lump fuel metering control b high (cam/rotor/injector) for obvious defects.
- Compare live data against expected upper threshold and verify reference voltage.
- Check for related DTCs to identify the root-cause chain before replacing parts.
- After repair, clear codes and confirm readiness monitors complete without recurrence.
Severity of code P0259
Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.
Can you drive with P0259?
Most vehicles can be driven short-term with P0259, but postpone heavy load/highway driving until repaired.
If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.
How to fix it (step-by-step)
- Repair obvious wiring/connector faults first to prevent repeat parts replacement.
- Address the root fault mode (high) in the injection lump fuel metering control b high (cam/rotor/injector) circuit/system.
- Apply the required relearn/adaptation procedure if specified by service information.
- Road-test and verify P0259 remains cleared under the conditions that originally set the code.
Fix options
- Perform relearn/adaptation if required.
- Replace failed sensor if signal remains high.
- Clear DTCs and verify with live data and completed drive cycle.
Typical repair cost
$220-$1100
Common mistakes when diagnosing P0259
- Replacing parts without verifying voltage, ground, and signal integrity first.
- Ignoring related stored/pending codes that indicate upstream faults.
- Skipping post-repair verification drive cycle and readiness checks.
P0259 in common vehicles
P0259 appears across makes such as Nissan, Hyundai, Kia, Volkswagen. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.
Frequently asked questions
What causes P0259?
P0259 is commonly set by high faults affecting injection lump fuel metering control b high (cam/rotor/injector).
How much does it cost to fix P0259?
For P0259, repair costs are typically $220-$1100 depending on exact root cause, labor rates, and part quality.
Can I clear P0259 without repair?
You can clear P0259 temporarily, but the code usually returns until the underlying fault is corrected.