When P0276 appears, the control module has detected abnormal behavior related to Cylinder 6 Injector Circuit Low in fuel delivery and pressure control.
P0276 Code: Meaning, Symptoms, Causes & Fix
Overview
Symptoms
- hesitation under acceleration
- reduced fuel economy
- hard starting
Common causes
- Broken terminal inside harness affecting cylinder 6 injector circuit low
- Open circuit in wiring
- Connector pin damage/corrosion or harness stress near related components
How to diagnose P0276
- Confirm P0276 and capture freeze-frame data with a professional scan tool.
- Inspect wiring, connectors, and grounds related to cylinder 6 injector circuit low for obvious defects.
- Use a continuity test from module pin to component to identify opens/high resistance.
- Check for related DTCs to identify the root-cause chain before replacing parts.
- After repair, clear codes and confirm readiness monitors complete without recurrence.
Severity of code P0276
Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.
Can you drive with P0276?
Most vehicles can be driven short-term with P0276, but postpone heavy load/highway driving until repaired.
If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.
How to fix it (step-by-step)
- Repair obvious wiring/connector faults first to prevent repeat parts replacement.
- Address the root fault mode (open) in the cylinder 6 injector circuit low circuit/system.
- Apply the required relearn/adaptation procedure if specified by service information.
- Road-test and verify P0276 remains cleared under the conditions that originally set the code.
Fix options
- Repair open circuit and secure connector lock.
- Restore continuity and verify pin tension.
- Clear DTCs and verify with live data and completed drive cycle.
Typical repair cost
$220-$1100
Common mistakes when diagnosing P0276
- Replacing parts without verifying voltage, ground, and signal integrity first.
- Ignoring related stored/pending codes that indicate upstream faults.
- Skipping post-repair verification drive cycle and readiness checks.
P0276 in common vehicles
P0276 appears across makes such as Nissan, Hyundai, Kia, Volkswagen. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.
Frequently asked questions
What causes P0276?
P0276 is commonly set by open faults affecting cylinder 6 injector circuit low.
How much does it cost to fix P0276?
For P0276, repair costs are typically $220-$1100 depending on exact root cause, labor rates, and part quality.
Can I clear P0276 without repair?
You can clear P0276 temporarily, but the code usually returns until the underlying fault is corrected.