U0149 Code: Meaning, Symptoms, Causes & Fix

U0149

Overview

Code U0149 indicates a fault in Lost Communication With Gateway D, typically within module-to-module CAN communication.

Symptoms

  • feature communication timeout
  • multiple warning lights at once
  • intermittent no-start or limp mode

Common causes

  • Module power/ground instability affecting lost communication with gateway d
  • Network termination or gateway fault
  • Connector pin damage/corrosion or harness stress near related components

How to diagnose U0149

  1. Confirm U0149 and capture freeze-frame data with a professional scan tool.
  2. Inspect wiring, connectors, and grounds related to lost communication with gateway d for obvious defects.
  3. Check CAN high/low integrity, network termination resistance, and module wake-up status.
  4. Check for related DTCs to identify the root-cause chain before replacing parts.
  5. After repair, clear codes and confirm readiness monitors complete without recurrence.

Severity of code U0149

Moderate: This code is moderate severity: the vehicle may still operate, but fault progression can increase repair cost over time.

Can you drive with U0149?

Most vehicles can be driven short-term with U0149, but postpone heavy load/highway driving until repaired.

If the warning lamp is flashing or drivability/safety is affected, avoid driving and diagnose immediately.

How to fix it (step-by-step)

  1. Repair obvious wiring/connector faults first to prevent repeat parts replacement.
  2. Address the root fault mode (communication) in the lost communication with gateway d circuit/system.
  3. Apply the required relearn/adaptation procedure if specified by service information.
  4. Road-test and verify U0149 remains cleared under the conditions that originally set the code.

Fix options

  • Repair CAN high/low wiring or termination issue.
  • Stabilize voltage supply and module grounds.
  • Clear DTCs and verify with live data and completed drive cycle.

Typical repair cost

$260-$1300

Common mistakes when diagnosing U0149

  • Replacing parts without verifying voltage, ground, and signal integrity first.
  • Ignoring related stored/pending codes that indicate upstream faults.
  • Skipping post-repair verification drive cycle and readiness checks.

U0149 in common vehicles

U0149 appears across makes such as Ford, Toyota, Honda, Chevrolet. Failure patterns differ by platform: wiring routes, software calibration, and component supplier revisions can change root cause.

Frequently asked questions

What causes U0149?

U0149 is commonly set by communication faults affecting lost communication with gateway d.

How much does it cost to fix U0149?

For U0149, repair costs are typically $260-$1300 depending on exact root cause, labor rates, and part quality.

Can I clear U0149 without repair?

You can clear U0149 temporarily, but the code usually returns until the underlying fault is corrected.

Helpful tools